Categories

Top sellers

Specials

Wheeler

per page
Showing 1 - 30 of 85 items
  • $21.99 $22.99
    Sale!

    Crosshair Alignment LevelThe simplest, most accurate scope leveling system ever devised. Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. The Level-Level-Level works...

    $21.99 $22.99
    In stock
  • $88.99 $89.99
    Sale!

    89 Piece Deluxe Gunsmithing KitScrewdrivers are the most important and most-used gunsmithing tools.Wheeler's Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any...

    $88.99 $89.99
    In stock
  • $37.99 $38.99
    Sale!

    Bedrock Bedding KitA rifle's accuracy is dependent on the fit of its barreled action to its stock. Bedrock makes your rifle's stock and metal components fit together to eliminate shift and pressure points caused by recoil and changes in temperature and humidity. Removing the contact points of the stock where the barreled action meets, and replacing them...

    $37.99 $38.99
    In stock
  • $87.99 $88.99
    Sale!

    Action WrenchHeavy duty tools to deliver the strength and rigidity required for proper barrel removal and installation. The action wrench safely surrounds and supports the receiver ring. The 15" long, 1" diameter steel handle will overcome even the tightest assemblies.

    $87.99 $88.99
    In stock
  • $94.99 $95.99
    Sale!

    Barrel Vise with 3 Oak BushingsThe vise provides plenty of holding force to securely clamp your barrel for removal. The vise includes two pre-drilled oak blocks, 1" and 3/4" and one solid block for custom drilling.

    $94.99 $95.99
    In stock
  • $24.99 $25.99
    Sale!

    Universal Bench BlockFor firearm assembly and disassembly, the Universal Bench Block is your best friend.It features a variety of notches, grooves, and holes on both sides and is ideally suited for M1911-style pistols. Need to install a pin, detent, or spring? The Universal Bench Block is the answer. 1-5/16" high, 4" in diameter.Non-marring urethane for...

    $24.99 $25.99
    In stock
  • $59.95 $60.95
    Sale!

    FAT Wrench w/10-Bit SetWheeler's FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.Features:- Torque...

    $59.95 $60.95
    In stock
  • $122.99 $123.99
    Sale!

    1" Scope Mounting KitThis complete kit provides everything necessary to mount virtually any 1-inch scope the correct way. Proper scope installation is critical to the accuracy of your firearm. Alignment and Lapping of rings ensure maximum surface area contact between scope tube and rings. This not only helps the rings hold the scope more securely but also...

    $122.99 $123.99
    In stock
  • $58.99 $59.99
    Sale!

    Professional Reticle Leveling SystemTechnological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system's scope is critical to realizing the accuracy. A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret...

    $58.99 $59.99
    In stock
  • $18.99 $19.99
    Sale!

    Nylon / Brass HammerLikely to become your favorite hammer at the bench or on the range. Nylon face is non-marring and is great for alignment and other uses where a steel hammer is not appropriate. Brass face can be used for driving pins and punches, and a multitude of other uses.Specifications:- Size: 11" overall - Weight: 8 oz.

    $18.99 $19.99
    In stock
  • $21.99 $22.99
    Sale!

    Scope Ring Alignment Bars, 1"The Scope Ring Alignment Bars, 1" provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range.

    $21.99 $22.99
    In stock
  • $76.99 $77.99
    Sale!

    Action WrenchHeavy duty tools to deliver the strength and rigidity required for proper barrel removal and installation. The action wrench safely surrounds and supports the receiver ring. The 15" long, 1" diameter steel handle will overcome even the tightest assemblies.

    $76.99 $77.99
    In stock
  • $33.99 $34.99
    Sale!

    Savage Barrel WrenchHeavy duty tools to deliver the strength and rigidity required for proper barrel removal and installation. The action wrench safely surrounds and supports the receiver ring. The 15" long, 1" diameter steel handle will overcome even the tightest assemblies. The double ended savage barrel nut wrench fits both early and late model nuts on...

    $33.99 $34.99
    In stock
  • $55.99 $56.99
    Sale!

    Scope Ring Alignment & Lapping KitAligning and lapping of new rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem...

    $55.99 $56.99
    In stock
  • $48.99 $49.99
    Sale!

    Bore Lapping KitLap your barrels to make them shoot better and easier to clean. Lapping polishes out the tool marks left in rifle barrels during manufacturing. Traditional hand-lapping is very labor intensive and requires pushing lead slugs down the bore by hand. The Wheeler kit allows you to embed lead or jacketed bullets with abrasive and fire them...

    $48.99 $49.99
    In stock
  • $82.99 $83.99
    Sale!

    Scope Ring Alignment & Lapping KitAligning and lapping of new rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem...

    $82.99 $83.99
    In stock
  • $36.99 $37.99
    Sale!

    Cerama-CoatWheeler Engineering's Cerama-Coat is a spray-on metal finish that brings life to old guns without expensive airbrushes or painting equipment.This one-can solution is the toughest metal finish available. This is an ultra-modern formula that contains a ceramic matrix, giving the finish ultimate durability, wear-resistance, and protection against...

    $36.99 $37.99
    In stock
  • $23.99 $24.99
    Sale!

    Set of 3 Replacement Oak BushingsThe replacement set includes a 1", 3/4" and one solid block for custom drilling.

    $23.99 $24.99
    In stock
  • $13.99 $14.99
    Sale!

    Delta SRS AR Bolt Catch Install Punch KitWheeler AR Bolt Catch Install Punch KitFeatures:- Start bolt catch roll pin easily with starter punch- Finish installation flush with the finishing punch- Flat on one side for proper alignment

    $13.99 $14.99
    In stock
  • $79.95 $80.95
    Sale!

    Digital Fat WrenchWheeler Digital F.A.T. WrenchFeatures:- Ergonomic over molded design- Large LCD Digital display for ease of viewing- 15-100 in./lb. range- 2% accuracy (+/-)- Audible indicator tone- Visual indicator- Low battery indicator- Soft touch buttons- Injection molded storage case

    $79.95 $80.95
    In stock
  • $141.99 $142.99
    Sale!

    Mounting Kit Combo, 1" & 30mmThis complete kit provides everything necessary to mount virtually any 1-inch or 30mm scope the correct way, including an instructional DVD. Proper scope installation is critical to the accuracy of your firearm.Alignment and Lapping of rings ensure maximum surface area contact between scope tube and rings. This not only...

    $141.99 $142.99
    In stock
  • $55.99 $56.99
    Sale!

    Scope Ring Alignment & Lapping KitAligning and lapping of rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem before...

    $55.99 $56.99
    In stock
  • $14.99 $15.99
    Sale!

    Space-Saver Screwdriver SetThe Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It's also the perfect size to include on your trips to the range and the field.Included with the standard, Phillips, hex, and torx...

    $14.99 $15.99
    In stock
  • $45.99 $46.99
    Sale!

    Screwdriver Upgrade KitDeluxe Screwdriver 17 Piece Upgrade SetSet Includes:- Weaver/Ruger Scope Ring Clamp Bit- Redfield Windage Screw Bit- Leupold Windage Screw Bit- Ruger/Colt AR Base Pin Latch Nut Bit- 1911 Grip Screw Bushing Driver- M1/M14/M1A Rear Sight Bit- Millett Rear Sight Adjustment Bit- Mauser Stock Bolt Bit- .062" Pin Punch- .093" Pin Punch-...

    $45.99 $46.99
    In stock
  • $71.99 $72.99
    Sale!

    72-piece Screwdriver KitScrewdrivers are the most important and most-used gunsmithing tools.Wheeler's Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any...

    $71.99 $72.99
    In stock
  • $21.99 $22.99
    Sale!

    Brass Punch SetQuality crafted Steel and Brass Punch Sets assist the gunsmith in assembly and disassembly of all kinds of firearms. Reduce the chances of marring and burring that can occur with improperly sized or makeshift punches. Both Steel and Brass Sets contain eight precision crafted pin punches in sizes you can use.The larger non-marring brass...

    $21.99 $22.99
    In stock
  • $35.99 $36.99
    Sale!

    Hammer & Punch Set, Plastic CaseThe Wheeler Hammer and Punch Set includes a polymer/brass combination hammer, eight precision brass punches, four steel punches, and two plastic punches. It makes a great tool for driving pins, drifting sights, at the shooting range or on your workbench. Includes a convenient carry case that securely holds all...

    $35.99 $36.99
    In stock
  • $20.99 $21.99
    Sale!

    AR-15 Mag Well Vise Block Delta SeriesThe Delta Series AR-15 Mag Well Vise Block is quite possibly the handiest tool an AR-15 owner could ask for. Designed for use with the Tipton Best Gun Vise, this center support slides into the magazine well and provides a steady base for cleaning or light gunsmithing on your AR-15, in either breech or closed position....

    $20.99 $21.99
    In stock
  • $33.99 $34.99
    Sale!

    AR-15 Bore Guide Delta SeriesThe AR-15 Bore Guide is precision CNC machined aluminum with a durable anodized finish. It fits securely in any AR-15 upper and can be retained in place by closing the dust cover on the upper which engages a groove in the guide. The bore guide also has chemical resistant O-rings for retention in uppers without dust covers. It...

    $33.99 $34.99
    In stock
  • $30.99 $31.99
    Sale!

    AR-15 Upper Vise Block Clm Delta SeriesThe Delta Series AR-15 Upper Vise Block is optimized for left hand and right hand Mil Spec A2 upper receivers with carry handles, as well as flattop style receivers. Other AR-15 variants may be adapted with special attention to potentially non-conforming surfaces or features. The Block allows you to safely clamp on...

    $30.99 $31.99
    In stock
Showing 1 - 30 of 85 items