> Wheeler

Categories

Top sellers

All best sellers

Specials

Viewed products

Wheeler

per page
Showing 61 - 85 of 85 items
  • $122.99 $123.99
    Sale!

    1" Scope Mounting KitThis complete kit provides everything necessary to mount virtually any 1-inch scope the correct way. Proper scope installation is critical to the accuracy of your firearm. Alignment and Lapping of rings ensure maximum surface area contact between scope tube and rings. This not only helps the rings hold the scope more securely but also...

    $122.99 $123.99
    Add to cart
    In stock
    Add to Compare
  • $59.95 $60.95
    Sale!

    FAT Wrench w/10-Bit SetWheeler's FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.Features:- Torque...

    $59.95 $60.95
    Add to cart
    In stock
    Add to Compare
  • $37.99 $38.99
    Sale!

    Bedrock Bedding KitA rifle's accuracy is dependent on the fit of its barreled action to its stock. Bedrock makes your rifle's stock and metal components fit together to eliminate shift and pressure points caused by recoil and changes in temperature and humidity. Removing the contact points of the stock where the barreled action meets, and replacing them...

    $37.99 $38.99
    Add to cart
    In stock
    Add to Compare
  • $88.99 $89.99
    Sale!

    89 Piece Deluxe Gunsmithing KitScrewdrivers are the most important and most-used gunsmithing tools.Wheeler's Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any...

    $88.99 $89.99
    Add to cart
    In stock
    Add to Compare
  • $32.99 $33.99
    Sale!

    AR Combo Tool Delta SeriesCover most of your AR-15 service needs with a single tool. An innovative layered and laminated stamped steel construction makes the Delta Series Combo Tool the most durable AR tool available. This construction method allows the use of hardened steel barrel nut pins designed to hold up to heavy torque requirements. A cut out for a...

    $32.99 $33.99
    Add to cart
    In stock
    Add to Compare
  • $269.99 $270.99
    Sale!

    AR Armorers Professional KitThe Wheeler Delta Series AR Armorer's Professional Kit contains all of the tools a gunsmith or armorer needs to complete a full rifle build, make repairs or perform maintenance on AR-15/M16 platform rifles. Each of these Delta Series tools is designed with application specific features to perform specific functions with...

    $269.99 $270.99
    Add to cart
    In stock
    Add to Compare
  • $6.99 $7.99
    Sale!

    AR Front Sight ToolThis 4-prong front sight tool is designed to adjust the A2 front sight found on the AR-15, M16, and M4. It is machined from steel and has a black zinc finish to last for years. The key ring serves as a handle and helps keep the small tool accounted for.Features:- Install and adjust standard Mil-Spec A2 front sights on AR-15, M16, and...

    $6.99 $7.99
    Add to cart
    In stock
    Add to Compare
  • $7.99 $8.99
    Sale!

    AR Pivot Pin/Roll Pin Install ToolWheeler Delta Series AR Pivot Pin Install Tool For the AR-15, M4 or M-16. Makes pivot spring and detent work fast and effortless. Roll Pin Punch and starter for all lower receiver roll pins. Comes with handy key ring for storage. Black zinc plated steel.Features:- For the AR-15, M4 or M-16- Makes pivot spring and detent...

    $7.99 $8.99
    Add to cart
    In stock
    Add to Compare
  • $63.99 $64.99
    Sale!

    AR Armorers ViseThe AR-15 platform has become the mainstay of today's Modern Sporting Rifle market. The popularity and modularity of this platform has created the need for specific tools that allow users to build, maintain and reconfigure AR's. The Delta Series Armorer's Vise provides users an ideal foundation for all AR tasks. The integrated mag well...

    $63.99 $64.99
    Add to cart
    In stock
    Add to Compare
  • $127.99 $128.99
    Sale!

    AR Armorers Essentials KitThe Wheeler Delta Series AR Armorer's Essentials Kit contains all of the essential tools a gunsmith or armorer needs to complete a full rifle build, make repairs or perform normal maintenance on AR-15/M16 platform rifles. Each of these Delta Series tools is designed with application specific features to perform specific functions...

    $127.99 $128.99
    Add to cart
    In stock
    Add to Compare
  • $26.99 $27.99
    Sale!

    Delta Series AR-10 Mag Well Vise BlockThe Wheeler Fine Gunsmith Equipment Delta AR-10 Mag Well Vise Block has been designed to make sure that you can properly maintain your favorite weapon. Gunsmithing Gear from Wheeler is made using incredibly durable material that are guaranteed to last for an incredibly long time without needing to be replaced. For a...

    $26.99 $27.99
    Add to cart
    In stock
    Add to Compare
  • $39.99 $40.99
    Sale!

    Anti-Cant IndicatorKeeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope, even just a couple of degrees, can cause error in point of impact. With modern "Drop-Compensating" scopes, an Anti-Cant Indicator is a necessity. If your gun isn't aligned correctly dialing up the turrets, or using hold-over marks, will just...

    $39.99 $40.99
    Add to cart
    In stock
    Add to Compare
  • $39.99 $40.99
    Sale!

    Anti-Cant IndicatorKeeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope, even just a couple of degrees, can cause error in point of impact. With modern "Drop-Compensating" scopes, an Anti-Cant Indicator is a necessity. If your gun isn't aligned correctly dialing up the turrets, or using hold-over marks, will just...

    $39.99 $40.99
    Add to cart
    In stock
    Add to Compare
  • $178.99 $179.99
    Sale!

    Professional Laser Bore SighterThe Professional Laser Bore Sighter uses a high power daylight visible green laser and a high-strength magnetic connection to the barrel to deliver fast accurate bore sighting.This system works with virtually all firearms rifles, shotguns, handguns. The magnetic connection to the end of the muzzle provides more precise...

    $178.99 $179.99
    Add to cart
    In stock
    Add to Compare
  • $14.99 $15.99
    Sale!

    AR-15 Delta Ring Tool Delta SeriesThe AR-15 Delta Ring Tool makes removing mil-spec AR-15 and M16 handguards easy by compressing the Delta Ring with one hand. The 100% Vinyl coating protects the guns finish from damage but is very durable, and is custom formed wire fits securely around Delta Ring. The Delta Ring Tool has a welded steel bracket for...

    $14.99 $15.99
    Add to cart
    In stock
    Add to Compare
  • $21.99 $22.99
    Sale!

    Crosshair Alignment LevelThe simplest, most accurate scope leveling system ever devised. Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. The Level-Level-Level works...

    $21.99 $22.99
    Add to cart
    In stock
    Add to Compare
  • $46.99 $47.99
    Sale!

    AR Upper Picatinny Rail Vise Block Delta SeriesThis innovative AR vise block is designed to securely hold basically any AR upper receiver. It will secure AR-15 uppers by engaging the take down lugs on the bottom of the receiver. By reversing the direction it will secure most AR-10 style uppers in the same manner. In addition it will secure any Pic Rail on...

    $46.99 $47.99
    Add to cart
    In stock
    Add to Compare
  • $37.99 $38.99
    Sale!

    AR-10 Bore Guide Delta SeriesThe Wheeler Delta Series AR-10 Bore Guide will help protect the bore and action of your rifle. Cleaning without a bore guide can allow the rod to "bow" and rub or gouge chamber and throat of the bore causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force...

    $37.99 $38.99
    Add to cart
    In stock
    Add to Compare
  • $53.99 $54.99
    Sale!

    AR Combo Tool w/Torque Wrench Delta SeriesCover most of your AR-15 service needs with a single tool. An innovative layered and laminated stamped steel construction makes the Delta Series Combo Tool the most durable AR tool available. This construction method allows the use of hardened steel barrel nut pins designed to hold up to heavy torque requirements....

    $53.99 $54.99
    Add to cart
    In stock
    Add to Compare
  • $30.99 $31.99
    Sale!

    AR-15 Upper Vise Block Clm Delta SeriesThe Delta Series AR-15 Upper Vise Block is optimized for left hand and right hand Mil Spec A2 upper receivers with carry handles, as well as flattop style receivers. Other AR-15 variants may be adapted with special attention to potentially non-conforming surfaces or features. The Block allows you to safely clamp on...

    $30.99 $31.99
    Add to cart
    In stock
    Add to Compare
  • $33.99 $34.99
    Sale!

    AR-15 Bore Guide Delta SeriesThe AR-15 Bore Guide is precision CNC machined aluminum with a durable anodized finish. It fits securely in any AR-15 upper and can be retained in place by closing the dust cover on the upper which engages a groove in the guide. The bore guide also has chemical resistant O-rings for retention in uppers without dust covers. It...

    $33.99 $34.99
    Add to cart
    In stock
    Add to Compare
  • $20.99 $21.99
    Sale!

    AR-15 Mag Well Vise Block Delta SeriesThe Delta Series AR-15 Mag Well Vise Block is quite possibly the handiest tool an AR-15 owner could ask for. Designed for use with the Tipton Best Gun Vise, this center support slides into the magazine well and provides a steady base for cleaning or light gunsmithing on your AR-15, in either breech or closed position....

    $20.99 $21.99
    Add to cart
    In stock
    Add to Compare
  • $35.99 $36.99
    Sale!

    Hammer & Punch Set, Plastic CaseThe Wheeler Hammer and Punch Set includes a polymer/brass combination hammer, eight precision brass punches, four steel punches, and two plastic punches. It makes a great tool for driving pins, drifting sights, at the shooting range or on your workbench. Includes a convenient carry case that securely holds all...

    $35.99 $36.99
    Add to cart
    In stock
    Add to Compare
  • $23.99 $24.99
    Sale!

    Set of 3 Replacement Oak BushingsThe replacement set includes a 1", 3/4" and one solid block for custom drilling.

    $23.99 $24.99
    Add to cart
    In stock
    Add to Compare
  • $76.99 $77.99
    Sale!

    Action WrenchHeavy duty tools to deliver the strength and rigidity required for proper barrel removal and installation. The action wrench safely surrounds and supports the receiver ring. The 15" long, 1" diameter steel handle will overcome even the tightest assemblies.

    $76.99 $77.99
    Add to cart
    In stock
    Add to Compare
Showing 61 - 85 of 85 items