Pulsar AL-915 IR Illuminator PULSAR

AL-915 IR Illuminator, Black

Use the side-mounted Pulsar AL-915 IR Laser Illuminator to enhance the effectiveness of your digital night vision device. This compact and lightweight illuminator features an infrared laser diode to provide a tight and bright spot on your targets in very low light or total darkness. The illuminator features a clean beam spot, variable brightness, vertical and horizontal beam position adjustments, and flood-to-spot focusing. It is optimized to work with digital night vision devices and may be used as a counter-measure against intensifier tube NVDs because its wavelength is outside of their peak sensitivity. To obtain the best illumination, this device should be mounted on the side of your night vision device via Weaver rail.

Features:

- For Digital Night Vision Devices
- Not for Intensifier Tube NVDs
- 915nm Laser Diode/Adjustable Brightness
- 20mW Maximum Power Output
- Variable Beam Spot
- Side Weaver Rail Mounting
- 1/4"-20 Socket Adapter Included
- Rated IP55 Water-Resistant

Includes:

- Pulsar AL-915 IR Laser Illuminator (Matte Black, Side Mount)
- Carry Case
- Adapter for 1/4"-20 Socket
- Cleaning Cloth

Specifications:

- Light Source Class I Laser Diode: 20 mW equivalent, 915 nm
- Objective Lens Diameter: 22mm
- Beam Divergence: 7.2 x 2.3 -3.6°
- Battery / Runtime: 2 x AA batteries / 5 hours
- Weatherproofing: Water-resistant, IP55
- Operating Temperature: -13 to 104°C / -25 to 50°F
- Housing Material: Plastic
- Mount Type: Side Weaver rails
- Dimensions: 5.1 x 2.4 x 1.8"
- Weight: 6.0 oz.(with batteries)
4.6 oz.(without batteries)